User manual Hoover H-WASH 500 HWB 49AMBCR/1-80 (English (2024)

The washing label of your garment shows the recommended washing temperature.

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

The Hoover H-WASH 500 HWB 49AMBCR/1-80 has a weight of 65000 g.

The Hoover H-WASH 500 HWB 49AMBCR/1-80 has a height of 850 mm.

The Hoover H-WASH 500 HWB 49AMBCR/1-80 has a width of 600 mm.

The Hoover H-WASH 500 HWB 49AMBCR/1-80 has a depth of 530 mm.

The Hoover H-WASH 500 HWB 49AMBCR/1-80 has energy label A.

No, the Hoover H-WASH 500 HWB 49AMBCR/1-80 has an energy efficiency scale of A to G, which suggests it might not be the most energy-efficient option on the market.

The Hoover H-WASH 500 HWB 49AMBCR/1-80 has a rated capacity of 9 kg, allowing users to wash larger loads at once.

The Hoover H-WASH 500 HWB 49AMBCR/1-80 has a spin-drying class of B, indicating that it performs decently in terms of drying compared to other models.

Yes, the Hoover H-WASH 500 HWB 49AMBCR/1-80 has a noise level of 77 dB during spinning and 51 dB during washing, which could be considered relatively high.

Yes, the Hoover H-WASH 500 HWB 49AMBCR/1-80 comes equipped with a dosage assistant and AquaStop function, which can enhance the user experience and help prevent potential water leaks.

To select the appropriate program for your laundry needs on the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine, follow these steps:1. Familiarize yourself with the available programs: Refer to the program table in the manual to understand the different programs offered by the washing machine.2. Consider the type of fabric: Check the clothing labels to determine the recommended washing instructions for each item. Different fabrics may require specific programs to ensure proper cleaning and care.3. Assess the level of soiling: Determine the level of dirtiness on your laundry. If the clothes are lightly soiled, you can choose a shorter and more energy-efficient program. For heavily soiled items, opt for a longer and more intensive program.4. Select additional options (if applicable): Some programs may offer additional options such as Active Wash, Night & Day, or Drum Clean. These options can optimize water and energy consumption, adjust spin speed, or clean the washing machine drum.5. Press the corresponding program button: Once you have identified the appropriate program, press the corresponding button on the control panel. Make sure to select any desired additional options before pressing the Start/Pause button.Remember to always follow the guidelines provided by the clothing labels and the program table in the manual to ensure the best results for your laundry.

If your Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine is not turning on, you can follow these steps to troubleshoot the issue:1. Check the power supply: Ensure that the washing machine is plugged into a working power outlet. Verify that the power is turned on and that the wall socket is functioning properly by testing it with another appliance.2. Verify the door closure: Make sure that the door of the washing machine is correctly closed. Open and close the door again to ensure it is securely latched.3. Confirm program selection: Check if the correct program has been selected and if the start button has been pressed. Ensure that the washing machine is not in pause or time delay mode.4. Examine the power cord and connections: Inspect the power cord for any damage or loose connections. Make sure the electrical system is properly grounded and complies with all applicable laws.5. Contact customer service: If the washing machine still does not turn on after following these steps, it is recommended to contact the Customer Service Centre for further assistance. They will be able to provide guidance and arrange for any necessary repairs.Remember to always prioritize safety by unplugging the appliance before performing any maintenance or troubleshooting steps.

To adjust the temperature and spin speed settings on the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine, follow these steps:1. Turn on the washing machine: Ensure that the washing machine is plugged in and the power is turned on.2. Select the desired program: Choose the program that best suits your laundry needs by turning the program selector knob or pressing the corresponding program button on the control panel.3. Adjust the temperature: To adjust the temperature, use the temperature selector knob or buttons. Rotate the knob or press the buttons to increase or decrease the temperature according to the recommended settings for your laundry.4. Set the spin speed: Use the spin speed selector knob or buttons to adjust the spin speed. Rotate the knob or press the buttons to select the desired spin speed, considering the fabric type and the level of moisture you want to retain in your clothes.5. Start the program: Once you have adjusted the temperature and spin speed settings, press the Start/Pause button to begin the selected program.Remember to refer to the program table in the manual for recommended temperature and spin speed settings for different types of fabrics.

If the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine is not filling with water, you can follow these steps to troubleshoot the issue:1. Check the power supply: Ensure that the washing machine is plugged into a working power outlet and that the power is turned on.2. Verify the water supply: Make sure that the water supply to the washing machine is turned on and that there are no issues with the water pressure or supply.3. Inspect the water inlet hose: Check the water inlet hose for any kinks, twists, or blockages. Straighten the hose if necessary and ensure that it is securely connected to both the washing machine and the water supply tap.4. Clean the water inlet filter: Locate the water inlet filter, which is usually located at the connection point of the water inlet hose and the washing machine. Remove the filter and clean it thoroughly to remove any debris or sediment that may be blocking the water flow.5. Contact customer service: If the washing machine still does not fill with water after following these steps, it is recommended to contact the Customer Service Centre for further assistance. They will be able to provide guidance and arrange for any necessary repairs.Remember to always prioritize safety by unplugging the appliance before performing any maintenance or troubleshooting steps.

To clean the detergent drawer and filter of the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine, follow these steps:1. Remove the detergent drawer: Pull out the detergent drawer located on the front of the washing machine. Press the release button or lever, if applicable, to detach the drawer from the machine.2. Clean the detergent drawer: Rinse the detergent drawer under running water to remove any residue or buildup. Use a soft brush or cloth to scrub away any stubborn stains or deposits. Ensure that all compartments of the drawer are thoroughly cleaned.3. Clean the filter: Locate the filter, usually located at the bottom front of the washing machine. Place a towel or container beneath the filter to catch any water that may spill out. Twist or pull the filter out and carefully remove any lint, debris, or foreign objects trapped inside. Rinse the filter under running water to remove any remaining residue.4. Reassemble the detergent drawer and filter: Once the detergent drawer and filter are clean and dry, reinsert the detergent drawer back into its slot. Ensure that it is securely in place. Push the filter back into its original position and make sure it is tightly sealed.Regularly cleaning the detergent drawer and filter helps maintain the performance and efficiency of your washing machine.

If the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine is not draining properly, you can follow these steps to troubleshoot the issue:1. Check for clogs: Inspect the drain hose and pump filter for any clogs or obstructions. Remove any debris or foreign objects that may be blocking the drainage system.2. Verify the drain hose: Ensure that the drain hose is properly connected and not kinked or twisted. Straighten the hose if necessary and make sure it is securely attached to the drain pipe or sink.3. Clean the pump filter: Locate the pump filter, usually located at the front or bottom of the washing machine. Place a towel or container beneath the filter to catch any water that may spill out. Twist or pull the filter out and clean it thoroughly, removing any lint, debris, or residue.4. Check the drain pump: Inspect the drain pump for any signs of damage or blockage. If the pump is faulty, it may need to be repaired or replaced by a qualified technician.5. Contact customer service: If the washing machine continues to have draining issues after following these steps, it is recommended to contact the Customer Service Centre for further assistance. They will be able to provide guidance and arrange for any necessary repairs.Remember to always unplug the washing machine before performing any maintenance or troubleshooting steps to ensure safety.

To activate the delay start feature on the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine, follow these steps:1. Turn on the washing machine: Ensure that the washing machine is plugged in and the power is turned on.2. Select the desired program: Choose the program that you want to use for your laundry by turning the program selector knob or pressing the corresponding program button on the control panel.3. Adjust the settings: Before activating the delay start feature, adjust any desired settings such as temperature, spin speed, and additional options.4. Activate the delay start: Locate the delay start button on the control panel. Press the button to activate the delay start feature. Use the time selector knob or buttons to set the desired delay time. The display will show the selected delay time.5. Start the program: Once the delay start feature is activated and the desired delay time is set, press the Start/Pause button to begin the program countdown. The washing machine will start automatically after the set delay time has elapsed.Remember to consider the specific needs of your laundry and the recommended delay time for different types of fabrics.

If the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine is displaying an error code, you can follow these steps to troubleshoot the issue:1. Identify the error code: Take note of the specific error code displayed on the washing machine. The error code will be shown as a number preceded by the letter "E" (e.g., E2).2. Refer to the error code table: Consult the error code table in the manual to understand the possible causes and practical solutions for the specific error code. Each error code corresponds to a specific issue that needs to be addressed.3. Check water supply and drainage: For error codes related to water supply or drainage issues, ensure that the water supply tap is open, the water supply hose is not bent or kinked, and the drain hose is not blocked or trapped. Clean the "anti-sand" filter and check for any clogs or foreign objects in the filter compartment.4. Address foam and water issues: If the error code indicates excessive foam or water, ensure that the correct amount of detergent is being used and that it is designed for use in a washing machine.5. Verify door closure: For error codes related to the door, ensure that the door is correctly closed and that there are no obstructions preventing it from closing fully.6. Restart the machine: If the error persists, turn off and unplug the washing machine for a minute, then turn it back on and restart a program. If the error code reoccurs, it is recommended to contact an Authorized Customer Service Centre for further assistance.Remember to always prioritize safety by unplugging the appliance before performing any maintenance or troubleshooting steps.

To perform a maintenance cycle on the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine, follow these steps:1. Empty the washing machine: Ensure that the washing machine is empty of any laundry or items.2. Prepare the machine: Close the door of the washing machine and ensure that it is securely latched. Make sure the power is turned on and the machine is plugged in.3. Select the maintenance cycle: Locate the maintenance cycle option on the control panel. This may be labeled as "Maintenance" or "Drum Clean." Select this option by turning the program selector knob or pressing the corresponding button.4. Adjust additional settings (if applicable): Some maintenance cycles may allow you to adjust additional settings such as temperature or spin speed. Follow the instructions on the control panel to make any desired adjustments.5. Start the maintenance cycle: Press the Start/Pause button to begin the maintenance cycle. The washing machine will now run a special program designed to clean the drum and remove any residue or buildup.6. Complete the cycle: Allow the maintenance cycle to run its full course. Once the cycle is complete, the washing machine will automatically stop.Performing regular maintenance cycles helps keep the washing machine clean and in optimal condition. It is recommended to perform a maintenance cycle every few months or as needed, depending on usage and water hardness.

If the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine is making unusual noises during operation, you can follow these steps to troubleshoot the issue:1. Check for unbalanced load: Pause the washing machine and redistribute the laundry inside the drum. Ensure that the load is evenly distributed to prevent imbalance, which can cause excessive noise during spinning.2. Verify the leveling: Ensure that the washing machine is properly leveled. Use a spirit level to check if the machine is balanced on all sides. Adjust the leveling feet if necessary to achieve a stable and even position.3. Remove foreign objects: Check the drum and the rubber door seal for any foreign objects such as coins, buttons, or small items that may be causing noise during operation. Remove any obstructions to prevent damage to the machine.4. Inspect the drain pump filter: Check the drain pump filter for any debris or blockages. A clogged filter can cause the washing machine to make unusual noises. Clean the filter if necessary.5. Contact customer service: If the unusual noises persist after following these steps, it is recommended to contact the Customer Service Centre for further assistance. They will be able to provide guidance and arrange for any necessary repairs.Remember to always prioritize safety by unplugging the appliance before performing any maintenance or troubleshooting steps.

To activate the steam function on the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine, follow these steps:1. Select a compatible program: Choose a program that supports the steam function. Refer to the program table in the manual to identify the programs that offer the steam option.2. Press the "Steam" button: Locate the "Steam" button on the control panel. Press this button to activate the steam function. The steam option indicator light will illuminate to indicate that the function is enabled.3. Start the program: Once the steam function is activated, proceed to start the selected program by pressing the Start/Pause button. The washing machine will now perform a dedicated steam treatment during the cycle to enhance cleaning efficiency, relax creases, and refresh the garments.Note: The availability of the steam function may vary depending on the specific model of the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine. Refer to the product specifications or consult the manual for more details on the steam function and its benefits.Please ensure to follow the recommended guidelines for fabric types and colors when using the steam function to achieve the best results.

If the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine is vibrating excessively during the spin cycle, you can follow these steps to address the issue:1. Check the load balance: Pause the washing machine and redistribute the laundry inside the drum. Ensure that the load is evenly distributed to prevent imbalance, which can cause excessive vibration. Remove any heavy items or reposition them to achieve a balanced load.2. Verify the leveling: Ensure that the washing machine is properly leveled. Use a spirit level to check if the machine is balanced on all sides. Adjust the leveling feet if necessary to achieve a stable and even position.3. Reduce the load size: If the excessive vibration persists, consider reducing the load size. Overloading the washing machine can lead to imbalance and increased vibration. Follow the recommended load capacity guidelines provided in the manual.4. Check the floor surface: Ensure that the washing machine is placed on a sturdy and level floor surface. Uneven or weak flooring can contribute to excessive vibration. Consider placing a vibration-damping mat or adjusting the machine's position to minimize vibration.5. Contact customer service: If the excessive vibration continues despite following these steps, it is recommended to contact the Customer Service Centre for further assistance. They will be able to provide guidance and arrange for any necessary repairs.Remember to always prioritize safety by unplugging the appliance before performing any maintenance or troubleshooting steps.

To reset the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine to its factory settings, follow these steps:1. Turn off the washing machine: Ensure that the washing machine is turned off and unplugged from the power outlet.2. Press and hold the Start/Pause button: Locate the Start/Pause button on the control panel. Press and hold this button for approximately 5 seconds.3. Power on the washing machine: While still holding the Start/Pause button, plug the washing machine back into the power outlet. Continue to hold the button until the display shows signs of resetting, such as flashing lights or changing symbols.4. Release the Start/Pause button: Once the display indicates that the reset process has started, release the Start/Pause button. The washing machine will now reset to its factory settings.5. Wait for the reset to complete: Allow the washing machine a few moments to complete the reset process. The display may show a countdown or other indicators during this time.After the reset is complete, the washing machine will be restored to its original factory settings. Please note that any customized settings or preferences will be erased, and you will need to reconfigure them according to your preferences.

If the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine is not completing the selected program, you can follow these steps to troubleshoot the issue:1. Check for power supply: Ensure that the washing machine is properly connected to a working power outlet and that the power is turned on. Verify that there are no power interruptions or electrical issues.2. Verify the water supply: Make sure that the water supply to the washing machine is turned on and that there are no issues with the water pressure or supply. Check for any kinks or blockages in the water inlet hose.3. Check the door closure: Ensure that the door of the washing machine is correctly closed and securely latched. If the door is not closed properly, the washing machine may not start or complete the selected program.4. Examine the load size: Avoid overloading the washing machine, as this can affect its performance. Make sure that the load size is within the recommended capacity for the selected program.5. Clean the filter: Check the pump filter for any debris or blockages. A clogged filter can disrupt the water flow and prevent the washing machine from completing the program. Clean the filter if necessary.6. Contact customer service: If the issue persists after following these steps, it is recommended to contact the Customer Service Centre for further assistance. They will be able to provide guidance and arrange for any necessary repairs.Remember to always prioritize safety by unplugging the appliance before performing any maintenance or troubleshooting steps.

To register the warranty for the Hoover H-WASH 500 HWB 49AMBCR/1-80 washing machine, follow these steps:1. Locate the warranty card: Check the packaging or documentation that came with the washing machine for a warranty card. The warranty card may be a separate document or included in the user manual.2. Fill out the warranty card: Provide the required information on the warranty card, such as your name, contact details, date of purchase, and serial number of the washing machine. Ensure that all information is accurate and legible.3. Submit the warranty card: Once you have completed the warranty card, follow the instructions provided to submit it. This may involve mailing the card to the designated address or registering the warranty online through the manufacturer's website.4. Keep a copy of the warranty card: Make a copy of the completed warranty card for your records. This will serve as proof of registration and may be required in the future for warranty claims or service requests.Note: If you are unable to locate a warranty card or have any questions regarding the warranty registration process, it is recommended to contact the manufacturer's Customer Service Centre for further assistance. They will be able to provide guidance and support in registering the warranty for your specific model.Please ensure to register the warranty within the specified timeframe mentioned in the warranty terms and conditions to ensure coverage for any potential issues with the washing machine.

Yes, the manual of the Hoover H-WASH 500 HWB 49AMBCR/1-80 is available in English .